| Customization: | Available |
|---|---|
| Type: | Stretch Blow Molding Machine |
| Processing Type: | Pet Bottle Making Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Servo Motor Driving 0.2-2L Maximum 2 Liter Plastic Water Bottle Blowing Molding Machine Price
Description
PET Bottle Blowing Machine(0.2-2L bottle) is suitable for producing PET plastic containers and bottles from 0.01-25L. It is widely used to produce the carbonated bottle, mineral water, carbonated drink bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
Features
1). Automatic preform conveyer to save human cost.
2). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
3). Introduce the FESTO air cylinder to avoid contamination and noise.
4). Strong clamping force with high pressure and double crank links to lock the mould.
5). Safereliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
6). Ideal cooling system make the finished bottles without any flaws.
7). Low rejection rate: less than 0.2 percent.
Parameter
| Model | Item | ZG-2 | ZG-4 | ZG-6 |
| Productivity | Depend on bottle design | 1800-2000PCS/H | 3200-4000PCS/H | 4000-5500PCS/H |
| Product type | Volume | 0.1-2.0L | 0.1-2.0L | 0.1-2.0L |
| Body diameter | ≤100mm | ≤100mm | ≤100mm | |
| Height | ≤310mm | ≤310mm | ≤330mm | |
| Neck diameter | ≤38mm | ≤38mm | ≤38mm | |
| Mold | Cavity | 2 | 4 | 6 |
| Mold thickness | 240mm | 240mm | 240mm | |
| Mold volume | 260*240*370mm | 510*240*360mm | 640*240*360mm | |
| Main machine power | Electrical source power | 380V/220V 50/60HZ | 380V/220V 50/60HZ | 380V/220V 50/60HZ |
| 3Phase | 3Phase | 3Phase | ||
| Rated power | 25kw | 49kw | 73kw | |
| Really use power | 6.5kw | 13kw | 25kw | |
| Air system | HP air compressor | 1.6m³/min3.0Mpa | 3.0m³/min3.0Mpa | 6.0m³/min3.0Mpa |
| LP air compressor | 1.0m³/min1.0Mpa | 1.6m³/min1.0Mpa | 2.0m³/min1.0Mpa | |
| Air tank | 0.6m³3.0Mpa | 0.6m³3.0Mpa | 1.0m³3.0Mpa | |
| Air dryer | 1.0m³/min3.0Mpa | 2.0m³/min3.0Mpa | 6.0m³/min3.0Mpa | |
| Cooling water | Water Chiller | 3HP | 3HP | 5HP |
| Machine | Size(L*W*H) | 1900*1280*1930mm | 1900*1860*1930mm | 4100*1400*1800mm |
| Weight | 2000kg | 3200kg | 3600kg | |
| Preform unscrambler | Size(L*W*H) | 2000*950*2480mm | 2000*950*2480mm | 2000*950*2480mm |
| Weight | 250kg | 250kg | 250kg |
Raw material
12g 16g 21g 32g 108g 250g 650g PET preform for water/juice bottle
We offers various PET preforms suiting different contents and production processes. Our Cold-Filling products can be applied to water-filling, aseptic-filling, and CSD-filling production. Hot-Filling products are suitable for hot-filling, pasteurization, and sterilization. Crystalized for Hot-Fill can resist up to 92° C (197° F) while Non-Crystallized for Hot-Fill can resist up to 88° C (190° F).
1.100% Virgin PET Resin
2. High transparency
3. High toughness
4. Blowing rate up to 99.7-99.8%
5. Low defect rate
6. Wide range of neck and weight preforms for your choice
7. Different colors is workable
8. Open new molds with low cost and less time
9. On time delivery
10. Competitive price & High quality(hot runner system preform mold)
PET bottles made by PET preform,there is strong applicability and are widely used in daily necessities, daily chemical packaging and other fields. From die processing to machine and equipment, it is very picky, easy to get started and difficult to do. PET bottle blanks are re-processed by blow moulding to form plastic bottles, including bottles used for packaging cosmetics, medicine, health care, beverages, mineral water, reagents, etc. This method is called two-step method, that is, the method of forming bottle blanks by injection moulding and then forming PET plastic bottles by blow moulding.
| Neck(mm) | Weight(gram) |
| 26 | 13g,14g,16g,18g |
| 28 PCO 1810 | 16g,18g,20g,21g,25g,28g,32g,35g,38g,42g,45g,52g,58g,63g |
| 28 PCO 1881 | 16g,18g,21g,25g,32g,35g,52g |
| 30 | 14g,16g,17g,18g,20g,21g,24g,26g,28g,30g,32g,36g,38g,42g,45g,50g |
| 30 PCO 2925 | 14g,16g,28g,30g |
| 38 | 16g,18g,20g,25g,28g,30g,38g,42g,50g,52g,70g,75g,80g |
| 45 | 70g,75g,90g,95g,100g,110g,115g,120g,130g,136g,145g,150g,180g |
| 48 | 88g,93g,95g,105g,150g,180g |
| 55 | 350g,550g,600g,630g,650g,680g,700g,730g,750g,800g |
Shipping
How Can I Visit Your Factory?
A: Our factory location:Zhenbei Road, Leyu Town, Zhangjiagang City, Jiangsu Province, China.
Contact: MOB : 0086 13584426100 (Vickie Sun)
Nearest train station: Wuxi Station / Wuxi East Station
Nearest international airport: Shanghai Pudong International airport (PVG) / Shanghai Hongqiao International airport (SHA) / Wuxi Shuofang airport (if you are already in China)
Q: How to can appropriate offer?
A: Please inform us below conditions to get the appropriate offer quickly:
1, What kind of product you will produce? Water, juice, carbonated drink, beer, ketchup or another?
2, What is your production capacity per hour / per day / per month?
3, What is your bottle types and cap types? Glass bottle, PET bottle, Aluminum can or another? And How many bottle types that you have?
4, What is the final labeling and packing manner?
Contact us
Contact person: Vickie Sun
MOB : 0086 13584426100
){kind=link}